Four side moulder

Detailed Product Description

STANDARD CONFIGURATION:1. This adopts step-less material feeding, material feeding speed ranges from 7m/min to 28m/min.
2. Each principal axis adopts independent drive to electric motor, features stronger cutoff force.
3. Adjusts for principal axis integrates at central or frontal side, features easy operation.
4. Galvanized workstation features superior abrasion resistance.
5. Equips with auxiliary unit alarming lack of material, it effectively improves smooth feed-in while lack of material.
6. Active roller below improves feeding efficiency.
7.  Pneumatic pressing feeding roller section by section adjusts for pressing force, it favors for smooth feed-in of different thicknesses of timber.
8. Adopts central charging system, features convenience and promptness.
9. Equips with world-class electric element, features superior stability.
10. With fully sealed safety protective cover, this effectively avoids flying logging debris and noise blocked, and even acts as safety protection.  

Machine Parameter		Horizontal Lifting	0.75KW/1HP
Working Width	25-230 mm	Feeding Motor	5.5KW/7.5HP
Working Thickness	8-150 mm	General Power	54.75KW/73HP
Working Table Length	1950 mm	Cutter Diameter /mm
Feeding Speed	7-28 m/min	1st Lower Shaft	φ125 mm
Main Shaft Diameter	φ40 mm	Right Vertical Shaft	φ125~φ180 mm
Main Shaft Revolution	6000 r/min	Left Vertical Shaft	φ125~φ180 mm
Pneumatic Source Pressure	0.6 MPa	1st Upper Shaft	φ125-φ180 mm
Motor Power		2nd Upper Shaft	φ125-φ180 mm
1st Lower Shaft	7.5KW/10HP	2nd Lower Shaft	φ125-φ180 mm
Right Vertical Shaft	7.5KW/10HP	Remarks/mm
Left Vertical Shaft	7.5KW/10HP	Feeding Wheel Diameter	φ140 mm
1st Upper Shaft	11KW/15HP	Dust outlet Diameter	φ140 mm
2nd Upper Shaft	7.5KW/10HP	Physical Dimension	4168×1635×1735 mm
2nd Lower Shaft	7.5KW/10HP